Installation & Maintenance

1. 1

   Clean the floor of the installation area thoroughly.

2. 2

   Measure the size of the room and prepare the required quantity of products.

3. 3

   Mark the center based on the entrance and draw guidelines.

4. 4

   Apply adhesive evenly across the entire floor using a trowel.

5. 5

   Arrange the products from the entrance following the guideline.

6. 6

   If the edges do not match the product size, trim with a cutter knife before installation.

※ Notice

1. 1

   Ensure the floor is dry and remove any protrusions to make the surface even.

2. 2

   When arranging the products, check the arrow direction on the back as colors may vary depending on the orientation.

3. 3

   Install the products so that the right angles align perfectly without gaps.

4. 4

   Be careful not to step on the adhesive applied to the floor.

Installation & Maintenance

1. 1

   Use a vacuum cleaner with a brush attachment to remove dirt and dust.

2. 2

   For light stains caused by liquids or oil, apply water and a neutral detergent to the affected area and gently scrub with a soft brush.
   After scrubbing, remove contaminants using a trowel and a dry cloth.

   ※ Notice : Rinse with clean water to ensure no detergent or residue remains on the carpet.

3. 3

   For heavy contamination, use a carpet cleaner capable of simultaneous water spraying and suction to remove dirt and stains.

4. 4

   For large areas, professional carpet cleaning services can be used. The process involves applying cleaning agents, scrubbing with machine brushes, and using equipment that sprays and extracts water simultaneously.

5. 5

   If the product is damaged, it can be partially or fully replaced.